Nylon G

Overview

Kormax Nylon G is a modified nylon that has the addition of oil to enhance its wear capabilities, pressure velocity ratio and reduce its friction. Kormax Nylon G has excellent impact strength, toughness wear resistance and can stand sustained contact with a wide variety of chemicals. Kormax Nylon G has good load bearing properties, low coefficient of friction and is self lubricating. It is available in a wide range of sizes in rods, sheets and tubes and can easily be machined.

Machining Allowances

All sizes are nominal sizes, please contact Kormax for any additional information if required.

Size Tolerances
Rod
50mm – 90mm > 0.3mm – 3.2mm
100mm – 160mm > 0.6mm – 4.2mm
170mm – 300mm > 1.1mm – 12mm
Sheet
10mm – 25mm > 0.2mm – 3mm
30mm – 50mm > 0.5mm – 3mm
60mm – 100mm > 0.5mm – 5mm

All  tolerances  are  subject  to  change  without   notice, please contact Kormax for further information.


Kormax Size Range

Kormax can also cut any size or shape to length at no extra cost

Rod
Kormax Nylon G Rod
Standard length 50 – 90mm 3000mm or cut to size 100 – 220mm 2000mm or cut to size 230 – 500mm 1000 or cut to size
Stock Code Yellow Diameter (mm) KG/MTR
KNGR50 50 2.45
KNGR60 60 3.5
KNGR65 65 4.1
KNGR70 70 4.7
KNGR75 75 5.5
KNGR80 80 6.2
KNGR90 90 7.8
KNGR100 100 9.6
KNGR110 110 11.9
KNGR120 120 14
KNGR130 130 16.2
KNGR150 150 21.6
KNGR160 160 25.5
KNGR180 180 31.3
KNGR200 200 38.6
KNGR230 230 52
KNGR250 250 60.7
KNGR270 270 71.8
KNGR300 300 87.5

up to 500mm diameter available

Sheet
Kormax Nylon G Sheet
Standard sheet size 10mm – 50mm 2500mm x 1220mm or cut to size 60mm – 120mm 2000mm x 1000mm or cut to size
Stock Code Yellow Thickness (mm) KG/MTR2
KNGS10 10 12.8
KNGS12 12 15.36
KNGS15 15 19.2
KNGS20 20 24.4
KNGS25 25 30.56
KNGS30 30 37.44
KNGS35 35 43.2
KNGS40 40 48.6
KNGS50 50 59.2
KNGS60 60 76.5
KNGS70 70 89
KNGS80 80 101
KNGS100 100 126

up to 200mm thick available


Use the Product Finder for product recommendations, based on the dimension of your finished size.


Submit Enquiry